Titan Series - PRIME BOND WB (2.5 GAL)

Prime Bond WB is most often used as a concrete floor primer. It has moderate UV resistance, compared with most epoxies and has very low odor. It is easy to apply and provides an excellent base layer for Ultra Guard MCU and our Armor Base Epoxies.

It is always recommended to mix the entire kit, whenever possible, to avoid off-ratio mixtures. Mix ratio is 1-part Prime Bond WB Hardener (Part A) to 4 parts Prime Bond WB Resin (Part B). Mix Part B until uniform, it will settle and separate and must be mixed prior to combining the A. Combine all of part A and B into a single container, large enough to except the entire kit. Mix using a 350 RPM mixer using an appropriate mixing blade for 1.5 – 2.5 minutes making sure to not introduce excessive air into the material. 

Pour entire content of mixed material onto the floor in ribbons. Spread material using a 5-7 mil squeegee at a rate of 200-400 sf per gallon. Back roll material using a 3/8” nap